rep showtrace
Parameters
Parameter |
Description |
Value |
---|---|---|
pid | Module ID. | Any valid module ID. |
Type | Type of a HyperMetro object. | The value can be "0", "1", or "2", where:
|
localId | Local ID. | To obtain the value, run the "show hyper_metro_pair general" command. |
opcode | Operation code. | Any valid operation code. |
Example
Query trace information.
admin:/diagnose>rep showtrace 632 0 0 0 Flow Name: OPCODE_CREATE General Info: ------ ------------------ ---------- ----------- ------- PairId 0x0 SucCnt 1 FailCnt 0 RuningStatus success Detail Info: Id Start Time cmd Name -- -------------------- ------------------------ 00 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_COMMON_LOG_COM 01 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_CRTPRE_INDEX_COM 02 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_CRTPRE_CREATE_PAIR 03 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_CRTPRE_CREATE_DB 04 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_CRTPRE_CREATE_PAIR_RUN 05 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_ADD_ARB_TO_DOMAIN 06 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_COMMON_DEL_DSLOG 07 2015-08-04/03:36:36 UTC REPHC_OPCODE_START_BGR REPHC_ACTION_TASK_OVER admin:/diagnose>
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
---|---|
Flow Name | Process name. |
General Info | General information. |
PairId | HyperMetro ID. |
SucCnt | Success count. |
FailCnt | Failure count. |
RuningStatus | Running status. |
Detail Info | Details. |
Id | ID. |
Start Time | Start time. |
cmd Name | Command name. |