Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dts
Function
The dts command is used to write a value to the specified physical address and display the value.
Parameters
Parameter |
Description |
Value |
---|---|---|
test_addr | Physical address where a value is to be written. | Enter the value as required. |
test_value | Value to be written. | Enter the value as required. |