Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nmgr showallinst
Function
The nmgr showallinst command is used to query the information of all instance objects that use the node manager in the system.
Example
Query the information of all instanced objects that use the node manager in the system.
admin:/diagnose>nmgr showallinst
Total Nodemgr Instances : 9
Index Node Segment Segment Magic
Instance ID OffSet Correct
----- ------------------ -------- ------- -----
0 0x1000000100000000 0x40000000 0x8000 1
1 0x1200000000 0xfef 0xc00 1
2 0x200000000 0xfef 0xc00 1
3 0x1000000000 0x20fef 0x1a0 1
4 0x1000000000 0x20fef 0x1c8 1
5 0x1200000002 0xfef 0xc00 1
6 0x200000002 0xfef 0xc00 1
7 0x1000000002 0x20fef 0x1a0 1
8 0x1000000002 0x20fef 0x1c8 1
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Total Nodemgr Instances | Total number of node manager instances. |
| Index | Index. |
| Node Instance | Volume ID of the instance. |
| Segment ID | Instance address. |
| Segment OffSet | Instance offset address. |
| Magic Correct | Whether the magic value of the instance is correct. |
Previous
