Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change logical_port failover_switch
Function
The change logical_port failover_switch command is used to enable or disable the failover function for logical ports in scenarios where faults occur.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| service_type | Service type applicable to the function of enabling or disabling the failover for logical ports in scenarios where faults occur. | The value is SAN. |
| switch | Switch of the failover function for logical ports in scenarios where faults occur. | The value can be "on" or "off". |
