Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bgr showoverload
Function
The bgr showoverload command is used to query the overload information about background copy tasks on a dataset.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| ds id | LUN ID or file system ID. | To obtain the value, run "show lun general" or "show filesystem general" as the administrator. |
Example
Query the overload information about a specified dataset.
ibc_os_hs:/diagnose>bgr showoverload 0 Time SrcId DstId Speed Level WorkLoad ConcurNum BandWidth ------------------- ---------- ---------- ---------- ---------- ---------- ---------- ----------
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Time | Time when the overload control occurs. |
| SrcId | Source LUN ID. |
| DstId | Target LUN ID. |
| WorkLoad | Control level of a background task. |
| BandWidth | Target bandwidth. |
| ConcurNum | Number of concurrent background copies. |
| Level | Overload level. |
| Speed | Synchronization speed. |
Previous
