Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ftds debuginfo
Function
The ftds debuginfo command is used to query the debugging information of the FTDS module.
Format
ftds debuginfo type
Parameters
Parameter |
Description |
Value |
|---|---|---|
type |
Type of debugging information. |
|
Views
Diagnostic view
Usage Guidelines
None
Example
Query the debugging information of the FTDS tracking flow.
admin:/diagnose>ftds debuginfo 1
--------------dump trace flow information:--------------
// FlowName FlowID TraceMode TimeOut DutyMode DutyRadix InhbPeriod InhbBound HangNums AbnormalNums PersistNums
//------------------------------ -------- --------- --------- ---------- ----------- ---------- --------- ------------ ---------------- ---------------
HOST_READ 01 03 10000 01 10 60 10 00 00 00
HOST_WRITE 02 03 10000 01 10 60 10 00 00 00
STRIPE_DESTAGE 05 03 10000 01 10 60 10 00 00 00
LUN_DESTAGE 09 03 10000 01 10 60 10 00 00 00
PREFETCH 10 03 10000 01 10 60 10 00 00 00
SMB1_WRITEX 19 03 10000 01 10 60 10 00 00 00
SMB1_SESSSETUP 20 03 10000 01 10 60 10 00 00 00
SMB1_TCON 21 03 10000 01 10 60 10 00 00 00
SMB1_CREATEX 22 03 10000 01 10 60 10 00 00 00
SMB1_CLOSE 25 03 10000 01 10 60 10 00 00 00
SMB1_DELETEDIR 27 03 10000 01 10 60 10 00 00 00
SMB1_TRANS2 29 03 10000 01 10 60 10 00 00 00
SMB1_READX 31 03 10000 01 10 60 10 00 00 00
SMB1_DELETE 38 03 10000 01 10 60 10 00 00 00
SMB1_LOCKX 40 03 10000 01 10 60 10 00 00 00
SMB2_IOCTL 42 03 10000 01 10 60 10 00 00 00
SMB2_FIND 45 03 10000 01 10 60 10 00 00 00
SMB2_GETINFO 47 03 10000 01 10 60 10 00 00 00
SMB2_SETINFO 48 03 10000 01 10 60 10 00 00 00
SMB2_NEGO 51 03 10000 01 10 60 10 00 00 00
SMB2_TDIS 53 03 10000 01 10 60 10 00 00 00
SMB2_CREATE 54 03 10000 01 10 60 10 00 00 00
SMB2_CLOSE 55 03 10000 01 10 60 10 00 00 00
SMB2_READ 57 03 10000 01 10 60 10 00 00 00
SMB2_WRITE 58 03 10000 01 10 60 10 00 00 00
NFS3_GETATTR 59 03 10000 01 10 60 10 00 00 00
NFS3_SETATTR 60 03 10000 01 10 60 10 00 00 00
NFS3_LOOKUP 61 03 10000 01 10 60 10 00 00 00
NFS3_READ 63 03 10000 01 10 60 10 00 00 00
NFS3_WRITE 64 03 10000 01 10 60 10 00 00 00
NFS3_CREATE 65 03 10000 01 10 60 10 00 00 00
NFS3_MKDIR 66 03 10000 01 10 60 10 00 00 00
NFS3_REMOVE 69 03 10000 01 10 60 10 00 00 00
NFS3_RMDIR 70 03 10000 01 10 60 10 00 00 00
NFS3_RENAME 71 03 10000 01 10 60 10 00 00 00
NFS3_READDIRPLUS 74 03 10000 01 10 60 10 00 00 00
NFS4_ACCESS 76 03 10000 01 10 60 10 00 00 00
NFS4_CLOSE 77 03 10000 01 10 60 10 00 00 00
NFS4_CREATE 79 03 10000 01 10 60 10 00 00 00
NFS4_GETATTR 82 03 10000 01 10 60 10 00 00 00
NFS4_GETFH 83 03 10000 01 10 60 10 00 00 00
NFS4_LOOKUP 87 03 10000 01 10 60 10 00 00 00
NFS4_OPEN 90 03 10000 01 10 60 10 00 00 00
NFS4_READ 92 03 10000 01 10 60 10 00 00 00
NFS4_READDIR 93 03 10000 01 10 60 10 00 00 00
NFS4_REMOVE 95 03 10000 01 10 60 10 00 00 00
NFS4_RESTOREFH 97 03 10000 01 10 60 10 00 00 00
NFS4_SAVEFH 98 03 10000 01 10 60 10 00 00 00
NFS4_SETATTR 100 03 10000 01 10 60 10 00 00 00
NFS4_WRITE 101 03 10000 01 10 60 10 00 00 00
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
dump trace flow information |
Table of the tracking flow information. |
Previous
