No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system config_model

change system config_model

Function

The change system config_model command is used to modify the configuration mode of a storage system.

Format

change system config_model [ mode=? ]

Parameters

Parameter

Description

Value

mode=?

Configuration mode that needs to be changed.

The value can be single or multi:

  • single: single-controller.
  • multi: multi-controller.

Views

Developer view

Usage Guidelines

None

Example

  • Change the single-controller mode to the multi-controller mode for the storage system.
    developer:/>change system config_model 
      
    DANGER: You are about to change the controller configuration model of the storage system. This operation will change the controller configuration model from single-controller to multi-controller. 
      
    Suggestion: Before you run this command, confirm that you want to change the configuration model. 
      
    Have you read danger alert message carefully?(y/n)y 
      
    Are you sure you really want to perform the operation?(y/n)y 
      
    Command executed successfully.
  • Change the multi-controller mode to the single-controller mode for the storage system.
    developer:/>change system config_model mode=single 
    DANGER: You are about to change the controller configuration model of the storage system. This operation will change the controller configuration model from multi-controller to single-controller. 
    Suggestion: Before you run this command, confirm that you want to change the configuration model. 
      
    Have you read danger alert message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 649144

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next