Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal async_delete_apo
Function
The show pal async_delete_apo command is used to query the asynchronous deletion information about file systems.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| file_system_id=? | File system ID. | To obtain the value, run the "show file_system general" command without parameters. |
| controller=? | Controller ID. | The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Example
Query the asynchronous deletion information about file system "1".
developer:/>show pal async_delete_apo file_system_id=1 APO ID File Count Last File ID ------ ---------- ------------ 13 0 0 14 0 0 15 0 0 16 0 0 17 0 0 18 0 0 19 0 0 20 0 0 21 0 0 22 0 0 23 0 0 24 0 0 25 0 0 26 0 0 27 0 0 28 0 0 29 0 0
Previous
