Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pair showevent
Usage Guidelines
If the pair module is abnormal, you can run this command to view I/O events of the pair module.
Example
View I/O events of the pair module.
admin:/diagnose>pair showevent Seq Operation Time Id Type SrcLunId DstLunId SrcResult DstResult --- ---------------- ------------------- ---------- ---- ---------------- ---------------- --------------- --------------- 0 PAIR_EVENT 2017-06-13 21:15:10 4 6 4 12 -1 0 1 PAIR_EVENT 2017-06-13 21:15:10 2 6 2 10 -1 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Seq | Serial number of the I/O event. |
| Operation | Operation that causes the I/O event. |
| Time | Time when the I/O event occurs. |
| Id | Pair ID. |
| Type | Pair type. |
| SrcLunId | Source LUN ID. |
| DstLunId | Target LUN ID. |
| SrcResult | Value returned for the read/write I/O of the source LUN. |
| DstResult | Value returned for the read/write I/O of the target LUN. |
Previous
