No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
epl showlinkcnt

epl showlinkcnt

Function

The epl showlinkcnt command is used to view link information reported by the BDM. This command is used to locate alarms of exceeded specifications.

Format

epl showlinkcnt

Parameters

None

Views

Diagnostic view

Usage Guidelines

Run the "epl showlinkcnt" command on the working controller to view the link connection information reported by the BDM on the current controller.

Example

View the link connection information reported by the driver on the current controller.

admin:/diagnose> epl showlinkcnt
arrayWwn: 2100143004b0e46d;  sdevId: 32768.
arrayWwn: 2100143004b0e44c;  sdevId: 32769.
arrayWwn: 2100143004b0e44c;  sdevId: 32770.
arrayWwn: 2100143004b0e44c;  sdevId: 32771.
arrayWwn: 2100143004b0e44c;  sdevId: 32772.
arrayWwn: 2100143004b0e46d;  sdevId: 32773.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

arrayWwn

Remote device WWN.

sdevId

ID of the link on the BDM module.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728319

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next