Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show third_party_policy operation
Function
The show third_party_policy operation command is used to query the operation set monitored by a third-party policy.
Parameters
Parameter |
Description |
Value |
---|---|---|
policy_name=? | Policy name. | The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_). |
Example
-
Query all third-party policies under "vstore1".
developer@vstore1:/>show third_party_policy operation Policy ID Policy Name Protocol -------- -------- ---------- 1 test1 nfsv3
-
Query the third-party policy named "test" under "vstore1".
developer@vstore1:/>show third_party_policy operation policy_name=test Policy ID: 1 Policy Name: test Protocol: nfsv3 Filter: nfsv3:all