No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
spa diskusedcap

spa diskusedcap


The spa diskusedcap command is used to view the used capacity of a disk.


spa diskusedcap -p pool id -d disk logic id





pool id

Disk domain ID.

The value ranges from 0 to n minus one. n indicates the maximum number of disk domain.

disk logic id

Disk logic ID.



Diagnostic view

Usage Guidelines

This command must be run on the working controller of the disk domain.


View the used capacity of a disk.

admin:/diagnose>spa diskusedcap -p 0 -d 517 
Pool ID : 0 
Disk ID : 517 
Type : Meta 
Total Cap : 29056 
Used Cap : 832 
Free Cap : 28224 
Type : Data 
Total Cap : 530240 
Used Cap : 0 
Free Cap : 530240 
Total Free Cap : 530681

System Response


Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 660534

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next