Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d cpldbit -v
Parameters
Parameter |
Description |
Value |
|---|---|---|
| offsetaddr | Address of a logical register. | The value ranges from 0x00 to 0x1ff. |
| bit_num | Number of bits to be read. | The value ranges from 0 to 7. |
Example
-
View the value of a bit of a logical register. The command output varies depending on a specific product.
administrator@CTRL_A / $ cliget -d cpldbit -v 0x1e 1 Read cpld bit OK, 0
-
View the value of a bit of a logical register. The command output varies depending on a specific product.
iBMC:/->cliget -d cpldbit -v 0x1e 1 Read cpld bit OK, 0
