Advanced O&M Command Reference

switch

Enables or disables a phy.

The value can be "0" or "1", a hexadecimal value is also supported. where:

• "0": indicates that the port is disabled.
• "1": indicates that the port is enabled.

log_phyid

Phy ID.

For disk enclosures and storage devices integrating disks and controllers, the value ranges from 0 to 35. If the value is greater than or equal to 36, all phys will be operated by default. A hexadecimal value is also supported. The values are described as follows:

• "0": phy 0
• "1": phy 1
• "2": phy 2
• "3": phy 3
• "4": phy 4
• "5": phy 5
• "6": phy 6
• "7": phy 7
• "8": phy 8
• "9": phy 9
• "10": phy 10
• "11": phy 11
• "12": phy 12
• "13": phy 13
• "14": phy 14
• "15": phy 15
• "16": phy 16
• "17": phy 17
• "18": phy 18
• "19": phy 19
• "20": phy 20
• "21": phy 21
• "22": phy 22
• "23": phy 23
• "24": phy 24
• "25": phy 25
• "26": phy 26
• "27": phy 27
• "28": phy 28
• "29": phy 29
• "30": phy 30
• "31": phy 31
• "32": phy 32
• "33": phy 33
• "34": phy 34
• "35": phy 35
• "36" or greater: all phys.