No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d fancellinfo

cliget -d fancellinfo

Function

The cliget -d fancellinfo command is used to view information about fans.

Format

cliget -d fancellinfo

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

View the in-position status, speed level, rotational speed, health status, running module, and working status of fans.

administrator@CTRL_D / $ cliget -d fancellinfo
the FAN mode: Manually
the FAN Sleep State: Run
the FAN0's level: 8
the FAN0's Speed: 4560
the FAN0's speed State: Health
the FAN0's PwmState: Health
the FAN0's FgState: Health
the FAN1's level: 8
the FAN1's Speed: 4560
the FAN1's speed State: Health
the FAN1's PwmState: Health
the FAN1's FgState: Health
the FAN2's level: 8
the FAN2's Speed: 4200
the FAN2's speed State: Health
the FAN2's PwmState: Health
the FAN2's FgState: Health
the FAN3's level: 8
the FAN3's Speed: 4440
the FAN3's speed State: Health
the FAN3's PwmState: Health
the FAN3's FgState: Health
the FAN4's level: 8
the FAN4's Speed: 4680
the FAN4's speed State: Health
the FAN4's PwmState: Health
the FAN4's FgState: Health
the FAN5's level: 8
the FAN5's Speed: 4560
the FAN5's speed State: Health
the FAN5's PwmState: Health
the FAN5's FgState: Health
the fanboard's FAN Sleep State: Run
the FAN6's level: 5
the FAN6's Speed: 3540
the FAN6's speed State: Health
the FAN7's level: 5
the FAN7's Speed: 3600
the FAN7's speed State: Health
the FAN8' is not present.
the FAN9' is not present.
the FAN10's level: 5
the FAN10's Speed: 3690
the FAN10's speed State: Health
the FAN11's level: 5
the FAN11's Speed: 3630
the FAN11's speed State: Health

System Response

The following table describes the parameter meanings.

Parameter

Meaning

the FAN mode

Working mode of the fan (manual or automatic).

the FAN Sleep State

Working status of the fan (sleep or running).

the FAN0~5's level

Speed level of the fans whose IDs range from 0 to 5.

the FAN0~5's Speed

Rotational speed of the fans whose IDs range from 0 to 5.

the FAN0~5's speed State

Rotational speed status of the fans whose IDs range from 0 to 5.

the FAN0~5's PwmState

Pwm health status of the fans whose IDs range from 0 to 5.

the FAN0~5's FgState

Fg health status of the fans whose IDs range from 0 to 5.

the fanboard's FAN Sleep State

Working status of the fan control board (sleep or running).

the FAN6~11's level

Speed level of the fans whose IDs range from 6 to 11 on the fan control board.

the FAN6~11's Speed

Rotational speed of the fans whose IDs range from 6 to 11 on the fan control board.

the FAN6~11's speed State

Rotational speed health status of the fans whose IDs range from 6 to 11 on the fan control board.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 728456

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next