Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snap showlogzone
Function
The snap showlogzone command is used to view details about a specific snapshot in the log zone.
Format
snap showlogzone snapshotID=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
snapshotID=? |
Snapshot ID. |
The value ranges from 0 to n minus one. n indicates the maximum number of LUNs. |
Views
Diagnostic view
Usage Guidelines
None
Example
View details about a specific snapshot in the log zone.
admin:/diagnose>snap showlogzone 4
Logzone Type : None
Logzone Version : 0
Snapshot ID : 0
Reference Count : 0
Time Point : 0
DCL ID : 0
Restore Speed : Invalid
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Logzone Type |
LogZone command type. |
Logzone Version |
LogZone version. |
Snapshot ID |
Snapshot ID. |
Reference Count |
Count of references at a point in time. |
Time Point |
Time point. |
DCL ID |
ID of the differential bitmap. |
Restore Speed |
Restore speed. |
Previous
