Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rephc showstartinfo
Function
The rephc showstartinfo command is used to query the kickoff marker bit status of HyperMetro pairs.
Example
Query the kickoff marker bit status of HyperMetro pairs.
admin:/diagnose>rephc showstartinfo
Show rephc mod spec:
isRepHcStart :1
dbId :11
isDbOpenFail :0
domain state :5
isCgStartFail :0
isCgStart :0
isCgCtrlStart :0
isNeedMstToNormal :0
isNeedNormalToMst :0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| isRephcStart | Whether HyperMetro starts to work. |
| dbId | ID of the HyperMetro database. |
| isDbOpenFail | Whether the database fails to be started. |
| domainState | Service status of the HyperMetro domain module. |
| isCgStartFail | Whether the consistency group fails to be started. |
| isCgStart | Whether the services of the consistency group have been started. |
| isCgCtrlStart | Whether the memory has been recovered in the consistency group. |
| isNeedMstToNormal | Whether the master node in the cluster is changed to a normal node. |
| isNeedNormalToMst | Whether a normal node in the cluster is changed to the master node. |
Previous
