Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
grain showMergeBigTreeItem
Function
The grain showMergeBigTreeItem command is used to view bitmap information about large blocks on a merging tree.
Parameters
Parameter |
Description |
Value |
---|---|---|
file_system_id | File system ID. | To obtain the value, run the "show file_system general" command. |
type | Data type. | The value can be "0" or "1", where:
|
start_extent_id | Start extent ID. | The value is a hexadecimal number in the format of "0X". You can enter "0". |