Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show overload_control general
Function
The show overload_control general command is used to check overload control related parameters.
Example
-
Check the parameters when overload control is enabled.
developer:/>show overload_control general Enabled : Yes Max Inner IOPS : 2048000 Min Inner IOPS : 102400 Max Inner Bandwidth(MBps) : 1024 Min Inner Bandwidth(MBps) : 128 CPU Overload Threshold : 90 Alarm Time(s) : 300 Max Unmap Bandwidth(MBps) : 1024 Min Unmap Bandwidth(MBps) : 256 Max NAS operation OPS : 1000
-
Check the parameters when overload control is disabled.
developer:/>show overload_control general Enabled : No Max Inner IOPS : 2048000 Min Inner IOPS : 102400 Max Inner Bandwidth(MBps) : 1024 Min Inner Bandwidth(MBps) : 128 CPU Overload Threshold : 90 Alarm Time(s) : 300 Max Unmap Bandwidth(MBps) : 1024 Min Unmap Bandwidth(MBps) : 256 Max NAS operation OPS : 1000
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Enabled | Status of overload control. |
| Max Inner IOPS | Maximum inner IOPS. |
| Min Inner IOPS | Minimum inner IOPS. |
| Max Inner Bandwidth(MBps) | Maximum inner bandwidth. |
| Min Inner Bandwidth(MBps) | Minimum inner bandwidth. |
| CPU Overload Threshold | CPU overload threshold. |
| Alarm Time(s) | Overload alarm time. |
| Max Unmap Bandwidth(MBps) | Maximum unmap bandwidth. |
| Min Unmap Bandwidth(MBps) | Minimum unmap bandwidth. |
| Max NAS operation OPS | Maximum OPS required by the NAS operation. |
Previous
