Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show remote_replication last_fail_trace
Function
The show remote_replication last_fail_trace command is used to obtain process trace information of the last failure of a specific remote replication.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| pair_id=? | Remote replication ID. | To obtain the value, run "show remote_replication unified". |
| controller=? | ID of the controller. | The value is in the format of XA or XB. X is an integer ranging from 0 to the value of the number of controller pairs minus 1. |
Example
Obtain process trace information of the last failure of remote replication "e09796543d250005".
developer:/>show remote_replication last_fail_trace pair_id=e09796543d250005 controller=0B Opcode Action ID Start Time Task Name Action Name ----------------- --------- ----------------------------- --------------------------- ---------------------------------- OPCODE_START_SYNC 0 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_RELATION_CHECK OPCODE_START_SYNC 1 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_START_TRANS OPCODE_START_SYNC 2 2015-05-04/11:26:37 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_SEND_CMD_TO_SLV OPCODE_START_SYNC 3 2015-05-04/11:26:38 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_UPDATE_TRANS OPCODE_START_SYNC 4 2015-05-04/11:26:38 UTC+08:00 MST_AFTER_SLV_TEMP REPTMP_ACTION_HANDLE_REP_SVC OPCODE_START_SYNC 5 2015-05-04/11:26:38 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CREATE_LOG OPCODE_START_SYNC 6 2015-05-04/11:26:38 UTC+08:00 SINGLE_SYNC_MST_PRE_SVC REP_SVC_ACTION_CLEAR_SYNC_PROGRESS OPCODE_START_SYNC 7 2015-05-04/11:26:38 UTC+08:00 CLEAR_SYNC_PROGRESS_ERR_SVC REP_SVC_ACTION_DELETE_LOG OPCODE_START_SYNC 8 2015-05-04/11:26:38 UTC+08:00 CLEAR_SYNC_PROGRESS_ERR_SVC REP_SVC_ACTION_TASK_OVER
Previous
