Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system mounts
Function
The show file_system mounts command is used to query user data file systems (such as, HTTP and FTP) mounted to all controllers and file systems used for audit logs. NFS, CIFS, and SMB shared file systems are excluded.
Example
Query details on file systems mounted to all controllers. The file systems are created by users, including file systems used for HTTP, FTP, and NDMP audit logs. File systems used by internal systems of controllers and NFS, CIFS, and SMB shared file systems are excluded.
developer:/>show file_system mounts Controller-ID IP Mount Point 01 10.60.80.1 /mnt/fs001 02 10.60.80.2 /Audit/fs_audit
System Response
Controller-ID IP Mount Point:The first column indicates the controller ID.The second column indicates one of the controller's IP addresses.The third column indicates the file system mount directory.
Parameter |
Meaning |
|---|---|
| Controller-ID | The first column indicates the controller ID. |
| IP | The second column indicates one of the controller's IP addresses. |
| Mount Point | The third column indicates the file system mount directory. |
Previous
