Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dlm resource_attribute
Function
The show dlm resource_attribute command is used to view the properties of a single DLM resource.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| controller=? | Controller ID. | The value is in the format of "XA", "XB", "XC", or "XD", where "X" is an integer ranging from 0 to 3, for example, "0A" or "1C". |
| hex_name=? | Resource name in the hexadecimal format. | To obtain the name of the resource whose type is "1", run the "show dlm resource_proxy" command in the developer view. |
Example
View the properties of a single resource.
engineer:/>show dlm resource_attribute hex_name=0062626200000000000000000000000000000000 controller=0A Pregrant Accessmode Pregrant Pregrantmode Pregrant Pregrantfactor Cache Number ------------------- --------------------- ----------------------- ------------ DEFAULT MAXIMIZE 0 200
Previous
