No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_takeover support_multipath

change lun_takeover support_multipath


The change lun_takeover support_multipath command is used to change the type of multipathing software supported by third-party masquerading LUNs.


change lun_takeover support_multipath lun_id=? multipathing_type=?





lun_id Takeover LUN ID.

To obtain the value, run "show lun_takeover general" without parameters.

multipathing_type Type of multipathing software supported by third-party masquerading LUNs.

The value can be "native_multipathing" or "powerpath", where:

  • "native_multipathing": native multipathing software of the operating system.
  • "powerpath": multipathing software of EMC.


Developer view

Usage Guidelines



Change the type of multipathing software supported by third-party masquerading LUNs.

developer:/>change lun_takeover support_multipath lun_id=0 multipathing_type=native_multipathing
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 719420

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next