No relevant resource is found in the selected language.
MENU
Support Documentation
Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
logzone batchGetlogWithVnode

logzone batchGetlogWithVnode

Function

The logzone batchGetlogWithVnode command is used to batch view logs of a specified log zone on a virtual node.

Format

logzone batchGetlogWithVnode logzonetype=? vnode=? startlogid=?

Parameters

Parameter

Description

Value
logzonetype=? Log zone type.

The value can be 1, 4, 5, 6, 7, 8, 9, 10, 11, 12, or 13.

  • transaction zone.
  • SNAP zone.
  • SPA zone.
  • CKG zone.
  • LUN zone.
  • RSIO zone.
  • RM zone.
  • LM zone.
  • CLN zone.
  • LUN mirror zone.
  • metadata repair zone.
vnode=? Virtual node ID.

The value ranges from 0 to 15.
startlogid=? Start log ID.

The value is

a 64-bit hexadecimal number with prefix 0x.

Views

Diagnostic view

Usage Guidelines

None

Example

Batch view transaction logs on a virtual node 0.

admin:/diagnose>logzone batchGetlogWithVnode logzonetype=1 vnode=0 startlogid=0xffffffffffffffff
Result: OK.
LogNum: 3.
 
logId: 0x0100000000039825
logId: 0x010000010003d221
logId: 0x010000020003d2e8

System Response

The following table describes the parameter meanings.

Parameter

Meaning
Result

Operation result.
logId

Log ID.
LogNum

Number of queried logs.
Translation
简体中文
Download
Updated: 2020-12-07

Document ID: EDOC1000181575

Views: 1032460

Downloads: 50

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Enterprise APP

Copyright © 2021 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :