No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain repair_env_status

change disk_domain repair_env_status


The change disk_domain repair_env_status command is used to enter or exit the repair environment of disk domain.


change disk_domain repair_env_status disk_domain_id=? action=?






ID of the disk domain whose repair environment you want to enter or exit.

To obtain the value, run the "show disk_domain general" command in the guest view.


To enter or exit the repair environment of a disk domain.

The value can be "exit" or "enter", where:

  • enter:to enter the environment.
  • exit:to exit the environment.


Developer view

Usage Guidelines



To enter the repair environment of disk domain 0, run the following command:

developer:/>change disk_domain repair_env_status disk_domain_id=0 action=enter 
DANGER: You are going to enter or exit a repair environment. Entering the repair environment will make the disk domain and LUNs to go offline and you will not be able to perform system configuration operations. Exiting the repair environment will make the disk domain and LUN go online, and you will be able to perform system configuration operations. 
Suggestion: Before you run this command,  
1. Ensure that host I/Os have been stopped.  
2. Ensure value-added services have been stopped. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response


Updated: 2019-07-11

Document ID: EDOC1000181575

Views: 661163

Downloads: 30

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next