Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk_reliability_policy slow_disk_detect
Function
The show disk_reliability_policy slow_disk_detect command is used to set related parameters of slow disk detection.
Example
Query related parameters of slow disk detection.
developer:/>show disk_reliability_policy slow_disk_detect Detect Switch : On Detect Isolate Diagnose Switch : Off Detect Threshold Multiple : 5 Detect Minor Cycle Time : 30 Detect Slow Cycle Count : 6 Detect Permit Slow Disk Count : 4 Detect Min Threshold Value : 10 Detect Max Threshold Value : 50 Detect Permit Slow Disk Time : 30
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Detect Switch | Switch of the slow disk detection function. |
| Detect Isolate Diagnose Switch | Switch of the isolation diagnosis feature. |
| Detect Threshold Multiple | Threshold multiplier for determining slow disks. |
| Detect Minor Cycle Time | Short period (unit: s). |
| Detect Slow Cycle Count | Number of slow periods. |
| Detect Permit Slow Disk Count | Maximum number of slow disks allowed to be reported within a period. |
| Detect Min Threshold Value | Minimum threshold for determining mean service time of slow periods (unit: ms). |
| Detect Max Threshold Value | Maximum threshold for determining mean service time of slow periods (unit: ms). |
| Detect Permit Slow Disk Time | Period of slow disks allowed to be reported (unit: day). |
Previous
