Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change spacetx timer
Function
The change spacetx timer command is used to set timers timeout time of a specific filesystems transaction.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| file_system_id=? | File system id. | To obtain the value, run the "show file_system general" command without parameters. |
| timeout_value=? | Time, units is second. | The value is an integer ranging from 1 to 3600. |
| controller=? | Controller ID. | The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Usage Guidelines
Before running this command, check whether the working controller ID of the file system is correct.
Previous
