No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change file_system online

change file_system online


The change dedup_lun rescue command is used to online the file_system.


change file_system online controller=? file_system_id=?





controller=? Indicates the owning controller of the file_system.

The value is in the format of XA or XB or XC or XD.X can be 0 to 3.

file_system_id=? Indicates the file system ID.

The value ranges from 0 to 65535.


Developer view

Usage Guidelines



To start the online task of the file system whose ID is "0", run the following command.

developer:/>change file_system online controller=0A file_system_id=0
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 723539

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next