No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro_vstore_pair cfg_switch

change hyper_metro_vstore_pair cfg_switch


The change hyper_metro_vstore_pair cfg_switch command is used to modify the switch status of configuration synchronization for a specified vStore pair.


change hyper_metro_vstore_pair cfg_switch pair_id=? partition_type=? option_type=? switch=?





pair_id=? HyperMetro vStore pair ID.

To obtain the value, run the "show hyper_metro_vstore_pair general" command.

partition_type Type of a configuration synchronization partition.
  • "resource": resource partition.
  • "nfs_v3": NFSv3 lock partition.
  • "global": global partition.
  • "domain": domain control partition.
option_type Option type ID.
  • For a resource partition, the value is "0".
  • For an NFSv3 lock partition, the value is "0".
  • For a global partition, the value is "0".
  • For a domain control partition, the value is "0", "1", or "2".
switch Switch status.

The value can be "on" or "off".


Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers. Modifying the switch status may result in inconsistency of active and standby configurations. Modify the switch status only when the link status is normal.


Modify the switch status of the configuration synchronization partition for a specified HyperMetro vStore pair. The pair ID is "200bc79b99520000", partition_type is "NFS_V3", option_type is "0", and the switch status is "Off".

developer:/>change hyper_metro_vstore_pair cfg_switch pair_id=200bc79b99520000 partition_type=nfs_v3 option_type=0 switch=off
DANGER: You are about to perform maintenance on the vStor configuration. This operation will lead to the inconsistency of user configuration between the two end of a vStor pair. When the vStor pair link is normal, this operation can change the status of the vStor pair configuration synchronization switch to "enabled" or "disabled". The switch is enabled by default. When the switch is disabled, user's configuration on the local end of the vStor pair only takes effect on the local end and will not be synchronized to the remote end. User configuration is not forbidden on the remote end.
Suggestion: Before the operation, contact the engineers and perform all the operations under their guidance. Besides, confirm that:
1. No other user is performing configuration on the system.
2. The input operation parameters are correct.Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181575

Views: 787373

Downloads: 37

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next