Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create third_party_policy provider
Function
The create third_party_policy provider command is used to create server information about a third-party policy.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| policy_name=? | Policy name. | The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_). |
| server_ips=? | IP address list of a third-party server. | The value is an IPv4 address. |
| port=? | Port number of a third-party server. | The value range is 1 to 65535. |
Example
-
Create server information about a third-party policy.
developer:/>create third_party_policy provider policy_name=test address=10.1.1.1 port=1 Command executed successfully.
-
Query creation results.
developer:/>show third_party_policy provider policy_name=test Policy ID: 1 Policy Name: test Server IPs: 10.1.1.1 Port: 1
