Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
scsi show system info
Function
The scsi show system info command is used to query information about ports and HyperMetro LUNs on HyperMetro storage arrays.
Example
Query information about ports and HyperMetro LUNs on HyperMetro storage arrays.
admin:/diagnose>scsi show system info **********local domain and remote domain info********** Local domain. node 4 port 128 TPG 1 : fe ff 1f 0 0 0 0 0 0 0 0 0 0 0 0 0 TPG 2 : 1e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TPG 3 : 7e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 TPG 4 : 7e 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Remote domain (arrayId:0). node 2 port 76 TPG 1 : e0 1f 0 0 0 1e 0 0 0 0 0 0 0 0 0 0 TPG 2 : fe 1f 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ******************************Controller 0A HcLun info****************************** lunId remoteWorkCtrl remoteArrayId remoteLocalStop remotePeerStop unavailable AOStatus initStatus -------- ------------- ------------- --------------- -------------- ----------- -------- ---------- 2007 1 0 No No No No Yes 2008 0 0 No No No Yes Yes 2009 1 0 No No No No Yes 2010 0 0 No No No No Yes 2011 1 0 No No No No Yes 2012 0 0 No No No Yes Yes 2013 1 0 No No No No Yes 2014 0 0 No No No No Yes 2015 1 0 No No No No Yes 2016 0 0 No No No Yes Yes 2017 1 0 No No No No Yes 2018 0 0 No No No No Yes 2019 1 0 No No No No Yes 2020 0 0 No No No Yes Yes 2021 1 0 No No No No Yes 2022 0 0 No No No No Yes 2023 1 0 No No No No Yes 2024 0 0 No No No Yes Yes 2025 1 0 No No No No Yes 2026 0 0 No No No No Yes
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
| Local domain | Current storage array. |
| node | Number of controllers. |
| port | Number of ports on each controller. |
| TPG X | The hexadecimal number of online ports on the Xth controller. |
| Remote domain | Remote storage array. |
| arrayId | Remote storage array ID. |
| lunId | Local LUN ID. |
| remoteWorkCtrl | ID of the working controller of the remote LUN. |
| remoteArrayId | ID of the remote storage array where the remote LUN resides. |
| remoteLocalStop | Whether the local storage array is in suspension state. |
| remotePeerStop | Whether the remote storage array is in suspension state. |
| unavailable | Whether the path of the current controller is unavailable. |
| AOStatus | Whether the path of the current controller is the preferred path. |
| initStatus | Whether the HyperMetro LUN is in initialization state. |
