No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_cache refresh

change lun_cache refresh


The change lun_cache refresh command is used to forcibly refresh the fault and dirty pages.


change lun_cache refresh [ lun_id=? ]





lun_id=? ID of the LUN.

To obtain the value, run "show lun general" without parameters.


Developer view

Usage Guidelines

The change lun_cache refresh command only delivers the refresh command. If you want to query the cache flushing result, run the show lun_cache general command.


Forcibly refreshing the fault and dirty pages of all LUNs.

admin:/>change lun_cache refresh
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 726906

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next