No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change verify_stripe enabled

change verify_stripe enabled


The change verify_stripe enabled command is used to enable or disable LUN stripe verification.


change verify_stripe enabled enabled=? [ lun_id=? ] [ lba=? length=? ]





enabled=? Indicates whether LUN stripe verification is enabled.

The value can be start or stop.

lun_id=? Indicates the LUN ID.

To obtain the value, run the show lun general command without parameters.

lba=? Indicates the starting LBA of stripe verification.


length=? Indicates the length of stripe verification.



Developer view

Usage Guidelines

This command is applicable only to the local controller.


  • Enable LUN stripe verification.

    developer:/>change verify_stripe enabled enabled=start lun_id=0 lba=0 length=100
    Command executed successfully.
  • Disable LUN stripe verification on the controller.

    developer:/>change verify_stripe enabled enabled=stop
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 721664

Downloads: 31

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next