No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xrb showintermem

xrb showintermem


The xrb showintermem command is used to show usage of internal resources on a connection.


xrb showintermem -s seqid





seqid Logical connection ID of XNET.

The value ranges from 0 to 0xffffffff.


Diagnostic view

Usage Guidelines



Show usage of internal resources on connection "16".

admin:/diagnose> xrb showintermem -s 16
Show conn(16) internal resource info:
Recvd Shells: 16
TX_Alloc REQ: 55
TX_Req Msg: 56
TX_Post Msg: 56
TX_Response: 56
RX_Local SGL: 56
RX_TimeoutCTX: 56
RX_Resp Msg: 56
Quota enable flag: 1

System Response

The following table describes the parameter meanings.




Connection ID.

Recvd Shells

Count of Recvd Shells at the receiver end.

TX_Alloc REQ

Count of Alloc REQs at the sender end.

TX_Req Msg

Count of request messages at the sender end.

TX_Post Msg

Count of post messages at the sender end.


Count of responses at the sender end.

RX_Local SGL

Count of Local SGL at the receiver end.


Count of timeout contexts at the receiver end.

RX_Resp Msg

Count of response messages at the receiver end.

Quota enable flag

Quota switch.

Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 731536

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next