Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
metadata showpt
Function
The metadata showpt command is used to view information about multiple partitions of the same object in the configuration synchronization module.
Parameters
Parameter |
Description |
Value |
|---|---|---|
| key | Key ID of the object in the configuration synchronization module. | To obtain the value, run the "metadata showobj" command. |
| userType | Type of the object in the configuration synchronization module. |
|
| ftrType | Type of the feature used for creating the object in the configuration synchronization module. |
|
Usage Guidelines
For file system pairs, run this command on the file system working controller. For vStore pairs, run this command on the cluster master node.
Example
View information about multiple partitions of the same object in the configuration synchronization module.
admin:/diagnose>metadata showpt 33554432 6 2 Pt Role SvcId Svc PtId IoCnt CmdCnt bgCnt bgStep NewStatus State -- ---- -------------------- --- -------------------- ----- ------ ----- ------ --------- ------- 0 0 1 6 144115191297081344 0 0 0 2 1 7 3 0 1 6 144115191347412992 0 0 0 2 1 7 8 0 1 6 144115191431299072 0 0 0 2 1 7
Previous
