No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change tgt cmd_burst

change tgt cmd_burst


The change tgt cmd_burst command is used to change the maximum number of concurrent I/Os of the front-end TGT.


change tgt cmd_burst burst=?





burst=? Maximum number of concurrent I/Os supported by the front-end TGT.

The value ranges from 1 to 3n. The default value is n. You can run the "show tgt cmd_burst" command to obtain the default value.


Developer view

Usage Guidelines



Changing the maximum number of concurrent I/Os of the front-end TGT to 8192.

developer:/>change tgt cmd_burst burst=8192
DANGER: You are about to change the maximum number of front-end TGT concurrent I/Os.
This operation changes the maximum number of front-end TGT concurrent I/Os, which may cause abrupt server performance deterioration and service interruptions.
Suggestion: Before performing this operation, ensure that you need to change the maximum number of front-end concurrent I/Os.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181575

Views: 730322

Downloads: 32

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next