No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting a Storage System to the DNS Server

Connecting a Storage System to the DNS Server

After a storage system is connected to a DNS server, you can access the storage system through the IP address or domain name. This operation enables you to configure a system management IP address for the active or standby DNS.


  • The DNS has been configured and is running properly.
  • Port 53 of the TCP/UDP protocol between the storage system and the DNS server is enabled.


  • A DNS server is used to resolve host names in a domain.
  • If you want to configure a standby DNS server, keep the domain names of the active and standby servers consistent.


  1. Log in to DeviceManager.
  2. Choose Settings > Basic Information > DNS Service.

  3. Set the DNS information.

    1. Set Active DNS IP Address.
    2. Optional: Set Standby DNS IP Address 1.
    3. Optional: Set Standby DNS IP Address 2.

      Please configure the standby DNS IP address 1 first and then the standby DNS IP address 2.

    4. Optional: Test the connection between the DNS server and storage system.
      • You can click Test of each DNS IP address to test its availability.
      • You can click Test All to test the connection between the DNS server and storage system.

  4. Click Save.

    The Success dialog box is displayed indicating that the operation succeeded.

  5. Click OK.
Updated: 2019-07-11

Document ID: EDOC1000181576

Views: 19427

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next