No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering on an Interface Module

Powering on an Interface Module

If you want to enable interface modules that have been powered off, power on them on DeviceManager.

Procedure

  1. Log in to DeviceManager.
  2. Choose System.
  3. Click to switch to the rear view.
  4. Click the interface module you want to power on.

    The Interface Module dialog box is displayed.

  5. Click Power On.

    The Success dialog box is displayed, indicating that the operation succeeded.

  6. Click OK. The interface module is powered on.
Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181576

Views: 18435

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next