No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Administrator Guide

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Authorized IP Addresses

Configuring Authorized IP Addresses

You can specify the IP addresses that can access the device from DeviceManager to prevent unauthorized access.


You are a super administrator. Only super administrators have the permission to perform this operation.


  1. Log in to DeviceManager.
  2. Choose Settings > Permission Settings > Authorized IP Addresses.
  3. Authorize IP addresses.

    1. Select Enable.
    2. Click Add.

      The Add IP Address/Address Segment dialog box is displayed.

    3. Enter the IP segment or IP address that can access the storage device.
      • To authorize an IP address segment, select IP address segment and set Start IP Address and End IP Address. IP addresses included in the IP address segment are allowed to access the storage device.
      • To authorize IP addresses, select IP address and set IP Address.
    4. Click OK. The specified IP segment or IP address is added to the IP address segment/IP address list.

      After this function is enabled, if you want to prevent one IP address or IP address segment from accessing devices, select the IP address or IP address segment from the IP address/IP address segment list and click Remove. Note that at least one IP address or IP address segment must be allowed access.

    5. Click Save, read and confirm the prompt information.

      The Execution Result dialog box is displayed indicating that the operation succeeded.

  4. Click Close.
Updated: 2019-07-11

Document ID: EDOC1000181576

Views: 19475

Downloads: 31

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next