No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Obtaining the Storage Device ESN

Obtaining the Storage Device ESN

The equipment serial number (ESN) is a character string that uniquely identifies a device. The ESN is required when you apply for licenses, report device repair, or configure the eService.

Context

  • You can query the ESN of a storage device on the information plate, on DeviceManager, or through the CLI.
  • For a multi-controller storage system that contains two or more controller enclosures, the ESN of controller enclosure 0 is used as the ESN of the storage system. The ESN of the multi-controller storage system queried on DeviceManager or CLI through the management network port of any controller enclosure is always the ESN of controller enclosure 0. You are advised to use DeviceManager or CLI to query the ESN. If you want to query the ESN on the information plate, obtain the position of controller enclosure 0 on the system networking diagram used for controller expansion and then check the ESN on the information plate of controller enclosure 0.

Querying the ESN on the Information Plate

The information plate is located on the right side of the front panel of a controller enclosure, as shown in the following figures. Pull out the information plate from the controller enclosure to query the device information.

Figure 5-24 Information plate position of a 2 U controller enclosure

Querying the ESN on DeviceManager

  1. Log in to DeviceManager.
  2. In the navigation tree on the right, click Home.
  3. In Basic Information, view SN.

Querying the ESN on the CLI

  1. Log in to the CLI.
  2. Run the show system general command to view the ESN, namely the SN field in the command output.

    admin:/>showsystemgeneral 
      System Name         : XXX.Storage  
      Health Status       : Normal  
      Running Status      : Normal  
      Total Capacity      : 3.186TB  
      SN                  : 2102XXXXXXXXXXXXXXXX  
      Location            :  
      Product Model       : XXXX  
      Product Version     : VX00R00XCXX  
      High Water Level(%) : 80  
      Low Water Level(%)  : 30  
      WWN                 : XXXX  
      Time                : 2018-07-07/15:34:05 UTC+08:00 
      Patch Version       : SPCXXX SPHXXX 
      Description         :

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181576

Views: 18464

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next