No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Administrator Guide

OceanStor 2800 V5 V500R007

This document is applicable to OceanStor 2800 V5. Routine maintenance activities are the most common activities for the storage device, including powering on or off the storage device, managing users, modifying basic parameters of the storage device, and managing hardware components. This document is intended for the system administrators who are responsible for carrying out routine maintenance activities, monitoring the storage device, and rectifying common device faults.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Deleting a VMTools File

Deleting a VMTools File

This operation enables you to delete a VMTools file of a VM.

Prerequisites

At least one VM exists in the storage system.

Do not delete a VMTools file using the SFTP tool. Otherwise, the VMTools file of the VM cannot be used normally. If a VMTools file is required, transfer it to the storage system. If no VMTools file is required, delete the VMTools file from the VM.

Procedure

  1. Go to the CLI.
  2. On the CLI, run the delete vmtools general package_name=? vm_fs_id=? command. Table 5-41 describes the related parameters.

    Table 5-41 Parameters for deleting a VMTools file

    Parameter

    Description

    Value

    package_name=?

    Name of the VMTools

    To obtain the value, run the show vmtools general command without parameters.

    vm_fs_id=?

    ID of the VM file system

    To obtain the value, run the show vm_fs general command without parameters.

  3. Confirm that all required parameters are correctly configured.

Example

Delete the VMTools.

admin:/>delete vmtools general package_name=vmtools.tgz vm_fs_id=0 
WARNING: You are about to delete a file. The deleted file can not be recovered. 
Suggestion: Before performing this operation, ensure that the target file is the one you want to 
delete. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.     
Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181576

Views: 18717

Downloads: 25

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next