No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

This document is applicable to the following product models.

Product Series

Product Model

OceanStor 18000 V5 series

OceanStor 18500 V5 and 18800 V5

OceanStor 18000F V5 series

OceanStor 18500F V5 and 18800F V5

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 06 (2019-05-15)

This is the sixth official release. The updates are as follows:

Added, modified, and deleted some commands.

Issue 05 (2018-12-06)

This is the fifth official release. The updates are as follows:

Added commands:

  • change system description
  • show ntp status
  • add snmp cache
  • change snmp cache
  • show snmp cache
  • remove snmp cache
  • change ssl_certificate passphrase
  • show fan_info general
  • change fan_info general
  • show performance raid

Modified commands:

  • change interface_module
  • change reduction general
  • show reduction general
  • show performance host
  • remove devicemanager dos_whitelist
  • show ftds level
  • show ftds switch
  • change port_group general
  • delete port_group
  • remove port_group port
  • show performance ib_port
  • show devicemanager dos_whitelist
  • add devicemanager dos_whitelist
  • add notification receiver
  • add storage_pool tier
  • show safe_strategy
  • test ldap configuration
  • show lun_format_process
  • add port_group port
  • change disk_domain general
  • change vlan general
  • create vlan general
  • delete vlan general
  • remove lun_takeover general
  • restore ssl_certificate
  • show notification email_extend
  • show notification receiver
  • show notification sms
  • show storage_pool tier
  • show vlan count
  • remove failover_group vlan_port
  • add failover_group vlan_port
  • import ssl_certificate
  • show event
  • show system server_port
  • create audit log
  • delete audit log_files
  • show notification event
  • show disk general
  • show lun_takeover general
  • add mapping_view lun_group
  • change notification sms
  • create storage_pool
  • remove notification receiver
  • change port fc
  • change notification email_extend
  • show port general
  • change ldap configuration
  • create ldap authconfig
  • create ldap configuration
  • delete ldap configuration
  • show ldap configuration
  • change system dns_load_balance
  • show interface_module
  • create dr_star general
  • export event
  • change dr_star enable
  • swap dr_star
  • show dr_star general
  • show dr_star member
  • change notification event
  • upgrade svp vm_system
  • show performance lun
  • show performance snapshot
  • show performance storage_pool
  • show performance link
  • show performance disk
  • show performance port
  • show performance consistency_group
  • show performance disk_domain
  • show performance lun_copy
  • change dr_star general
  • create hyper_metro_domain general
  • remove smartqos_policy lun
  • add smartqos_policy lun
  • show smartqos_policy snapshot
  • create smartqos_policy
  • change smartqos_policy general
  • show smartqos_policy file_system
  • remove cache_partition file_system
  • add cache_partition file_system
  • show cache_partition file_system
  • show cache_partition lun
  • show smart_cache_partition file_system
  • show performance cache_partition
  • show performance smartqos_policy
  • delete dr_star general
  • change dr_star third_resource_access
  • change dr_star disable
  • show performance elink
  • show performance file_system
  • show performance smart_cache_partition
  • show vlan general
  • change port eth
  • change fan_info general
  • show performance raid

Issue 04 (2018-07-30)

This is the fourth official release. The updates are as follows:

Added commands:

  • createfile_system_tier_task
  • changefile_system_tier_task
  • deletefile_system_tier_task
  • showfile_system_tier_task
  • showfile_system_tier_statistics
  • clearfile_system_tier_statistics
  • showfile_system_tier_policy
  • changedr_starthird_resource_access
  • swapdr_star
  • changedr_stardisable
  • changedr_starenable
  • showdr_starmember
  • changedr_stargeneral
  • showdr_stargeneral
  • deletedr_stargeneral
  • createdr_stargeneral
  • shownotificationevent
  • showperformancenfsv41
  • changenotificationevent
  • showcrlgeneral
  • showperformancesmart_cache_partition

Modified commands:

  • addhostib_initiator
  • deleteib_initiatorgeneral
  • removecache_partitionfile_system
  • removecache_partitionlun
  • changeisnsserver_ip
  • showluncache_partition
  • deletelun_destroy_data
  • removehostib_initiator
  • showlun_cachegeneral
  • showperformancedisk
  • showperformanceelink
  • showperformancelun_copy
  • showperformancesnapshot
  • showib_initiatorcount
  • showlun_destroy_dataupgrade_status
  • changeremote_devicelink
  • addmirror_lunlocal_mirror_copy
  • addmirror_lunremote_mirror_copy
  • createlun_destroy_data
  • changesnapshotname
  • changesnapshotrestore
  • changesnapshotspeed
  • createsnapshotduplicate
  • showsnapshotchildsnapshot
  • showhost_groupgeneral
  • deletehost_group
  • deletehost
  • deleteinitiatorfc
  • deleteinitiatoriscsi
  • deletelun_group
  • deletemapping_view
  • removehostinitiator
  • removehost_grouphost
  • showlun_migrationgeneral
  • showclonegeneral
  • addclonesecondary_lun
  • changeclonerestore
  • changeclonesynchronize
  • addlun_copylocal_target
  • addlun_copyremote_target
  • changelun_copygeneral
  • changemirror_copygeneral
  • changemirror_copysplit
  • changemirror_copysynchronize
  • createlun_copylocal
  • createlun_copyother_vendor
  • createlun_copyremote
  • createlun_migration
  • deleteclone
  • deletelun_copy
  • deletelun_migration
  • removeclonesecondary_lun
  • removelun_copylocal_target
  • removelun_copyremote_target
  • showmirror_lungeneral
  • showhostgeneral
  • addhostinitiator
  • addhost_grouphost
  • showmapping_viewgeneral
  • addremote_devicelinkiscsi
  • changealarm_object_mask
  • exportlicense
  • showperformancelun_priority
  • showstorage_engine
  • showmirror_copygeneral
  • removenotificationreceiver
  • changelun_group
  • changecli
  • showenclosure_max_depthgeneral
  • showperformanceconsistency_group
  • changesnapshotdeactivate
  • showperformancedisk_domain
  • changentp_serverconfig
  • changesystemntp
  • showdiskgeneral
  • showinterface_module
  • showcontrollergeneral
  • createlun_group
  • createhost_group
  • createmapping_view
  • addmapping_viewlun_group
  • showconsistency_groupmember
  • removeconsistency_groupremote_replication
  • changeconsistency_groupsplit
  • addconsistency_groupremote_replication
  • createconsistency_groupsynchronization
  • showconsistency_groupavailable_remote_replication
  • swapconsistency_group
  • addconsistency_groupremote_replication_delay
  • showconsistency_groupgeneral
  • changeconsistency_groupgeneral
  • createconsistency_groupverification_session
  • deleteconsistency_group
  • showreplication_connection_statusgeneral
  • showinitiator
  • showib_initiatorgeneral
  • changesnapshotreactivate
  • deletesnapshot
  • showvstore
  • changesnapshotactivate
  • showperformancestorage_pool
  • changenotificationsyslog
  • showremote_replicationgeneral
  • showclonesecondary_lun
  • upgradesvpvm_system
  • changesmisconfiguration
  • showperformancelink
  • changeservicendmp_restart_service
  • showperformancecontroller
  • showperformanceport
  • showsmart_cache_pooldisk
  • showsmart_cache_poolgeneral
  • addsmart_cache_pooldisk
  • deletesmart_cache_partition
  • removesmart_cache_partitionfile_system
  • removesmart_cache_partitionlun
  • showsmart_cache_partitionfile_system
  • showsmart_cache_partitionlun
  • showsmart_cache_partitiongeneral
  • addsmart_cache_partitionfile_system
  • addsmart_cache_partitionlun
  • removesmart_cache_pooldisk
  • createsmart_cache_partition
  • changesmart_cache_partitiongeneral
  • adddisk_domaindisk
  • addcache_partitionfile_system
  • addcache_partitionlun
  • addhyper_metro_consistency_grouppair
  • addhyper_metro_domainquorum_server
  • addlogical_portipv6_route
  • addmapping_viewhost_group
  • addmapping_viewport_group
  • addquorum_server_linkgeneral
  • addsmartqos_policyfile_system
  • changeantiviruspre_shared_key
  • changeclonegeneral
  • changecommon_configcifs
  • changefailover_groupgeneral
  • changefs_clonesplit
  • changehost
  • changehost_groupgeneral
  • changehyper_metro_consistency_grouppause
  • changehyper_metro_consistency_grouppriority
  • changehyper_metro_consistency_groupstart
  • changehyper_metro_consistency_groupsynchronize
  • changehyper_metro_pairpriority
  • changeldapconfiguration
  • changelogical_portfailover_group
  • changelun_migration
  • changemm_usersynchronize
  • changeperformancestatistic_enabled
  • changeservicecifs_config
  • changeshare_permissionftp
  • changesnapshotcancel_restore
  • changessl_certificatepassphrase
  • changestorage_poolrelocation_schedule
  • changestorage_poolrelocation_speed
  • changestorage_poolssd_enabled
  • changesystemlocation
  • changesystemname
  • changesystempermission_hardening
  • changesystemsecure_compliance_clock
  • changeuser_password
  • changeuser_ssh_auth_infogeneral
  • createcache_partition
  • createclone
  • createdisk_domain
  • createfs_clonegeneral
  • createhost
  • createhyper_metro_consistency_groupverification_session
  • createhyper_metro_domaingeneral
  • createldapauthconfig
  • createldapconfiguration
  • createmirror_lun
  • createquorum_servergeneral
  • createschedulemonitor
  • createschedulerelocate
  • createshare_permissionftp
  • deletecache_partition
  • deletedisk_domain
  • deletehyper_metro_consistency_group
  • deletehyper_metro_domaingeneral
  • deleteldapconfiguration
  • deletemirror_lun
  • deletequorum_servergeneral
  • deleteshare_permissionftp
  • poweroninterface_module
  • removehyper_metro_consistency_grouppair
  • removehyper_metro_domainquorum_server
  • removelogical_portipv4_route
  • removelogical_portipv6_route
  • removelun_grouplun
  • removemapping_viewhost_group
  • removemapping_viewlun_group
  • removemapping_viewport_group
  • removemirror_lunmirror_copy
  • removequorum_server_linkgeneral
  • removesmartqos_policyfile_system
  • showantivirusconfig
  • showcache_partitionfile_system
  • showcache_partitionlun
  • showcommon_configcifs
  • showfs_clonegeneral
  • showhosthost_group
  • showhostlun
  • showhostsnapshot
  • showhost_grouphost
  • showhost_groupmapping_view
  • showisnsserver_ip
  • showldapconfiguration
  • showlogical_portroute
  • showlunlun_group
  • showlunmapping_view
  • showlun_copygeneral
  • showlun_groupgeneral
  • showlun_grouplun
  • showlun_groupmapping_view
  • showlun_groupsnapshot
  • showlun_migrationcount
  • showlun_takeovergeneral
  • showmapping_viewhost_group
  • showmapping_viewlun_group
  • showmapping_viewport_group
  • showperformancecache_partition
  • showperformancecifs_service
  • showperformancenfs_service
  • showperformancenfsv3
  • showperformancenfsv4
  • showperformancesmb1
  • showperformancesmb2
  • showperformancesystem
  • showport_groupgeneral
  • showport_groupmapping_view
  • showport_groupport
  • showquorum_server_linkgeneral
  • showservicecifs_config
  • showserviceftp
  • showservicehttp
  • showservicendmp_tape
  • showshare_permissionftp
  • showshare_permissionftp_count
  • showsmartqos_policyfile_system
  • showsnapshotavailable_lun
  • showsnapshotlun_group
  • showsystempermission_hardening
  • showuser_sessionnumber
  • showuser_ssh_auth_infogeneral
  • changeporteth
  • showfilepackage_result
  • deletefile
  • changeconsistency_groupsynchronize
  • showfilenotification
  • exportconfiguration_data
  • changenotificationsms
  • showperformancestatistic_enabled
  • showportgeneral
  • changeinitiator
  • createinitiatoriscsi
  • createinitiatorfc
  • createib_initiatorgeneral
  • changeib_initiatorgeneral
  • importssh_host_key_file
  • changeevent_restoreenabled
  • exportclihistory
  • createhyper_metro_consistency_groupgeneral
  • changehyper_metro_pairgeneral
  • changehyper_metro_consistency_groupgeneral
  • exportevent
  • changeservicendmp_scanbus
  • showfileexport_path
  • changelun_copysession
  • changeantivirusconfig
  • changeuser_sessionnumber
  • changesvpmanagement_ip
  • createvstoregeneral
  • changevstoreinfo
  • deletevstoregeneral
  • createremote_devicegeneral
  • showperformancefile_system
  • deletelogical_portgeneral
  • changeremote_replicationgeneral
  • createconsistency_groupasynchronization
  • changediskerase
  • changesnapshotcapacity
  • changeftdsswitch
  • createstorage_pool
  • changestorage_poolgeneral
  • createsnapshotgeneral
  • addlun_copyother_vendor_target
  • changelun_migration_splitconsistency
  • removelun_copyother_vendor_target
  • changeclonesplit
  • changeclonesecondary_lun
  • showlun_copymember
  • showquorum_servergeneral
  • showcache_partitiongeneral
  • changecache_partitiongeneral
  • changesmtp_serverconfig
  • showremote_replication_vstoregeneral
  • createremote_replicationgeneral
  • addlogical_portipv4_route
  • showsmartqos_policylun
  • showsmartqos_template
  • deletesmartqos_template
  • removesmartqos_policylun
  • addsmartqos_policylun_group
  • changesmartqos_policyenabled
  • addsmartqos_policylun
  • deletesmartqos_policy
  • showsmartqos_policysnapshot
  • createsmartqos_policy
  • changesmartqos_policygeneral
  • showperformancesmartqos_policy
  • showsmartqos_policygeneral
  • changesmartqos_template
  • createsmartqos_template
  • changequorum_servergeneral
  • showsnapshotgeneral
  • changesnapshotdescription
  • createfile_system_tier_task
  • changefile_system_tier_task
  • deletefile_system_tier_task
  • showfile_system_tier_task
  • showfile_system_tier_statistics
  • clearfile_system_tier_statistics
  • showfile_system_tier_policy
  • changedr_starthird_resource_access
  • swapdr_star
  • changedr_stardisable
  • changedr_starenable
  • showdr_starmember
  • changedr_stargeneral
  • showdr_stargeneral
  • deletedr_stargeneral
  • createdr_stargeneral
  • showperformancenfsv41
  • changenotificationevent
  • changeportfc
  • showperformancelun
  • changehyper_metro_domaingeneral
  • showhyper_metro_domaingeneral
  • showcrlgeneral

Issue 03 (2018-05-09)

This is the third official release. The updates are as follows:

Added commands:

  • change snapshot description
  • change snapshot capacity
  • change performance restore

Modified commands:

  • add smartqos_policy lun
  • add smartqos_policy lun_group
  • change reduction general
  • change smartqos_policy enabled
  • remove cache_partition file_system
  • change smartqos_policy general
  • change smartqos_template
  • create smartqos_template
  • delete lun_destroy_data
  • delete smartqos_policy
  • remove smartqos_policy lun
  • show ib_port count
  • show lun_destroy_data upgrade_status
  • show reduction general
  • show schedule
  • show smartqos_policy general
  • add mirror_lun local_mirror_copy
  • create lun_destroy_data
  • show snapshot general
  • show lun_migration general
  • show clone general
  • add clone secondary_lun
  • change clone restore
  • change clone synchronize
  • add lun_copy other_vendor_target
  • change lun_migration_split consistency
  • create lun_migration
  • delete clone
  • delete lun_migration
  • remove clone secondary_lun
  • show smartqos_policy snapshot
  • show performance smartqos_policy
  • change storage_pool general
  • show storage_engine
  • show cache_partition general
  • show event
  • show alarm
  • change cli
  • change safe_strategy
  • show performance consistency_group
  • remove lun_copy other_vendor_target
  • change system timezone
  • create smartqos_policy
  • change clone split
  • create lun_group
  • add mapping_view lun_group
  • remove consistency_group remote_replication
  • change consistency_group general
  • change port fc
  • create snapshot general
  • show vstore
  • show quorum_server general
  • test system trust
  • change quorum_server general
  • show clone secondary_lun
  • show hyper_metro_domain general
  • change smis configuration
  • create remote_replication_vstore general
  • create remote_replication_vstore verification_session
  • change remote_replication_vstore general
  • change remote_replication_vstore split
  • change remote_replication_vstore synchronize
  • swap remote_replication_vstore
  • delete remote_replication_vstore general
  • change service ndmp_restart_service
  • show performance lun
  • add cache_partition file_system
  • add hyper_metro_consistency_group pair
  • add hyper_metro_domain quorum_server
  • add logical_port ipv4_route
  • add logical_port ipv6_route
  • add quorum_server_link general
  • change antivirus pre_shared_key
  • change audit_strategy
  • change cache_partition general
  • change clone general
  • change clone secondary_lun
  • change common_config cifs
  • change common_config nfs
  • change failover_group general
  • change hyper_metro_consistency_group pause
  • change hyper_metro_consistency_group priority
  • change hyper_metro_consistency_group start
  • change hyper_metro_consistency_group synchronize
  • change hyper_metro_pair priority
  • change icmp switch
  • change logical_port failover_group
  • change lun_migration
  • change service cifs_config
  • change share_permission ftp
  • change system permission_hardening
  • change vlan general
  • create audit log
  • create clone
  • create hyper_metro_consistency_group verification_session
  • create hyper_metro_domain general
  • create quorum_server general
  • create share_permission ftp
  • create storage_pool
  • create vlan general
  • delete audit log_files
  • delete disk_domain
  • delete hyper_metro_consistency_group
  • delete hyper_metro_domain general
  • delete quorum_server general
  • delete share_permission ftp
  • delete smartqos_template
  • delete vlan general
  • remove hyper_metro_consistency_group pair
  • remove hyper_metro_domain quorum_server
  • remove logical_port ipv4_route
  • remove logical_port ipv6_route
  • remove lun_group lun
  • remove quorum_server_link general
  • show antivirus config
  • show audit_strategy
  • show cache_partition file_system
  • show common_config cifs
  • show common_config nfs
  • show file_system file_handle
  • show logical_port route
  • show lun_copy member
  • show lun_migration count
  • show lun_takeover general
  • show performance cifs_service
  • show performance nfsv3
  • show performance nfsv4
  • show performance smb1
  • show performance smb2
  • show quorum_server_link general
  • show service cifs_config
  • show service ftp
  • show service http
  • show service ndmp_tape
  • show share_permission ftp
  • show share_permission ftp_count
  • show smartqos_policy lun
  • show smartqos_template
  • show system server_port
  • show system write_through_policy
  • show vlan count
  • show vlan general
  • add notification trap
  • create remote_replication general
  • delete hyper_metro_vstore_pair general
  • create hyper_metro_vstore_pair general
  • show hyper_metro_vstore_pair general
  • change hyper_metro_vstore_pair general
  • show hyper_metro_vstore_pair check_session
  • swap hyper_metro_vstore_pair worksite
  • change hyper_metro_vstore_pair start
  • change call_home general
  • change remote_replication_vstore local_vstore_port_status
  • change notification trap
  • create lun_takeover general
  • show performance file
  • create failover_group general
  • show port general
  • change initiator
  • remove failover_group vlan_port
  • add failover_group vlan_port
  • create hyper_metro_consistency_group general
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • change service ndmp_scanbus
  • change antivirus config
  • change svp management_ip
  • create vstore general
  • change vstore info
  • delete vstore general
  • show performance file_system
  • change notification email_extend
  • change smtp_server config
  • delete logical_port general
  • change ftds switch
  • change remote_replication general
  • create consistency_group asynchronization
  • change hyper_metro_domain general
  • change snapshot description
  • change snapshot capacity
  • show remote_replication_vstore general

Issue 02 (2018-1-30)

This is the second official release. The updates are as follows:

Added commands:

  • show performance smart_cache_partition
  • change performance restore
  • add failover_group fc_port
  • remove failover_group fc_port
  • show failover_group fc_port

Modified commands:

  • change smtp_server config
  • show performance restore
  • change snmp version
  • show event_restore
  • show diagnose_code
  • change system write_through_policy
  • show notification trap
  • create ib_initiator general
  • change ib_initiator general
  • change initiator
  • show host reachable
  • create initiator iscsi
  • change snmp usm
  • show kmc general
  • export kms key
  • change snmp safe_strategy
  • change vstore info
  • delete vstore general
  • change svp management_ip
  • create vstore general
  • show persistent_mirror silence_time
  • change persistent_mirror silence_time
  • show notification syslog
  • test call_home service
  • show port general
  • change service ftp
  • change hyper_metro_pair general
  • change hyper_metro_consistency_group general
  • change ntp_server config
  • change system ntp
  • add failover_group bond_port
  • add failover_group eth_port
  • add failover_group vlan_port
  • change disk erase
  • change event_restore enabled
  • change lun_copy session
  • change service ndmp_scanbus
  • change user_session number
  • create failover_group general
  • create hyper_metro_consistency_group general
  • create initiator fc
  • delete failover_group general
  • import ssh_host_key_file
  • remove failover_group bond_port
  • remove failover_group eth_port
  • remove failover_group vlan_port
  • show event_config
  • show performance file
  • show performance statistic_enabled
  • show performance strategy
  • show snmp context_name
  • show system general
  • show upgrade package
  • change snmp community
  • export running_data
  • show file export_path
  • export performance file
  • export cli history
  • export event
  • change event_config
  • change notification email_extend
  • change performance strategy
  • add failover_group fc_port

Issue 01 (2017-11-30)

This is the first official release.

Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000181601

Views: 296623

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next