No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change smart_cache_partition general

change smart_cache_partition general


The change smart_cache_partition general command is used to modify a SmartCache partition.


change smart_cache_partition general smart_cache_partition_id=? [ name=? ] [ expect_capacity=? ] [ max_io_threshold=? ]






SmartCache partition ID.

To obtain the value, run "show smart_cache_partition general".


SmartCache partition name.

The value is 1 to 31 characters in length and contains letters, numbers, underscores (_), and hyphens (-).


Expect capacity of the partition.

The value ranges from 0 GB to 16384 GB.



Usage Guidelines

OceanStor 18500 V5/18800 V5 storage systems support this command.


  • To change the name of the SmartCache partition whose ID is 1 to NN, run the following command:
    admin:/>change smart_cache_partition general smart_cache_partition_id=1 name=NN 
    Command executed successfully.
  • To change the capacity of SmartCache 1 to 200 GB, run the following command:
    admin:/>change smart_cache_partition general smart_cache_partition_id=1 expect_capacity=200GB 
    Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 328179

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next