No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fs_clone split

change fs_clone split

Function

The change fs_clone split command is used to start or stop the split of a clone file system.

Format

change fs_clone split file_system_id_list=? action=? [ split_speed=? ] [ delete_parent_snapshot=? ]

Parameters

Parameter

Description

Value

file_system_id_list=? List of clone file system IDs.
  • Multiple IDs are separated by commas (,). ID ranges can be separated by hyphens (-).
  • The ID is an integer from 0 to 65535.
action=? Action.

The value can be "start" or "stop".

split_speed=? Split speed.

The value can be "Low", "Medium", "High", or "Highest". The default value is "Medium".

delete_parent_snapshot=? Whether to delete the associated snapshot in the parent file system.

The value can be "yes" or "no". The default value is "no".

Level

Administrator

Usage Guidelines

Check whether the ID of the selected clone file system is correct before operation.

Example

  • Start the split of the clone file system whose ID is 1.

    admin:/>change fs_clone split file_system_id_list=1 action=start
    DANGER: You are about to start the split of clone file system. This operation may occupy extra memory, and all snapshots in the clone file system will be deleted.
    Suggestion: Before performing this operation, ensure that the ID of the selected clone file system is correct.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Change fs_clone split 1 successfully.
  • Stop the split of the clone file system whose ID is 1.

    admin:/>change fs_clone split file_system_id_list=1 action=stop
    DANGER: You are about to start the split of clone file system. This operation may occupy extra memory, and all snapshots in the clone file system will be deleted.
    Suggestion: Before performing this operation, ensure that the ID of the selected clone file system is correct.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Change fs_clone split 1 successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381866

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next