No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service ndmp

show service ndmp

Function

The show service ndmp command is used to query the NDMP configuration.

Format

show service ndmp

Parameters

None

Level

Guest

Usage Guidelines

None

Example

Query the NDMP configuration.

admin:/>show service ndmp
Is Enabled:Yes
User Name:ndmp
Port:10000
IP:192.168.0.1
Restoring Quota(%):95
Support Snapshot:Yes
Version:4
Ignore CTime:No
Password Expired:No
PIM Buffer(MB):250
Prefetch Enable:Yes
Readdir Plus Enable:Yes
Data Connect Mode:1
FS Global Scope:Off
Ads Enable:Yes

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Is Enabled

Whether to enable the NDMP service.

User Name

NDMP username.

Port

Port number.

IP

Listening IP address.

Restoring Quota(%)

Quota restored to the file system.

Support Snapshot

Whether to support snapshots.

Version

NDMP protocol version.

Ignore CTime

Whether to ignore ctime during backup.

Password Expired

Whether the password expires.

PIM Buffer(MB)

Buffer size on the PIM module.

Prefetch Enable

Whether to enable the prefetch function.

Readdir Plus Enable

Whether to enable the readdir plus function.

Data Connect Mode

Data connection is in LIF port mode.

FS Global Scope

Switch for enabling the vStore file system to be globally available.

Ads Enable

Whether to enable the ADS function.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378189

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next