No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show port route

show port route

Function

The show port route command is used to query the route settings of ports on the storage system.

Format

show port route [ eth_port_id=? ]

Parameters

Parameter

Description

Value

eth_port_id=? ID of a port.

To obtain the value, run "show port general".

Level

Guest

Usage Guidelines

None

Example

  • Query the route settings of all ports. The command output varies depending on a specific product.

    admin:/>show port route
     
    Port ID Destination Mask Gateway
    ------- ----------- --------------- -----------
    ENG0.A3.P0 192.168.3.0 255.255.255.0 192.168.1.1
    ENG0.A3.P0 192.168.4.1 255.255.255.255 192.168.1.2
    ENG0.A3.P0 0.0.0.0 0.0.0.0 192.168.1.3
    ENG0.A4.P0 10.1.1.0 255.0.0.0 10.1.5.3
    ENG0.A4.P0 10.3.2.0 255.255.255.0 10.3.2.56
  • Query the route settings of the iSCSI host port whose ID is "ENG0.A3.P0". The ID and output vary depending on a specific product.

    admin:/>show port route eth_port_id=ENG0.A3.P0
     
    Port ID Destination Mask Gateway
    ------- ----------- --------------- -----------
    ENG0.A3.P0 192.168.3.0 255.255.255.0 192.168.1.1
    ENG0.A3.P0 192.168.4.1 255.255.255.255 192.168.1.2
    ENG0.A3.P0 0.0.0.0 0.0.0.0 192.168.1.3

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Port ID

Port ID.

Destination

Destination address of the port route.

Mask

Subnet mask of the port route.

Gateway

Gateway of the port route.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381229

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next