No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show vstore

show vstore


The show vstore command is used to query the states of vStores.


show vstore [ id=? ]





id=? ID of a vStore.

The value is an integer ranging from 1 to 511. To obtain the value, run the "show vstore" command.



Usage Guidelines

  • Run the "show vstore" command to query the states of vStores.
  • Run the "show vstore id=?" command to query the state of a specified vStore.


  • Query the vStore whose ID is 2.

    admin:/>show vstore id=2                               
      ID                      : 2        
      Name                    : vstore1  
      Running Status          : Normal   
      Description             : test     
      SAN Capacity Quota      : 100.000GB 
      SAN Free Capacity Quota : 100.000GB 
      NAS Capacity Quota      : 100.000GB 
      NAS Free Capacity Quota : 100.000GB
      SAN Total Capacity      : 0.000B
      NAS Total Capacity      : 0.000B
  • Query information on existing vStores of the storage system.

    admin:/>show vstore
      ID  Name       Running Status  SAN Capacity Quota  NAS Capacity Quota  SAN Total Capacity  NAS Total Capacity
      --  ---------  --------------  ------------------  ------------------  ------------------  ------------------
      1   vStore001  Normal                    10.000GB           100.000GB              0.000B             0.000B
      2   vstore1    Normal                   100.000GB           100.000GB              0.000B             0.000B

System Response

The following table describes the parameter meanings.




vStore ID.


vStore name.


vStore description.

Running Status

Running status.

SAN Capacity Quota

SAN capacity quota of a vStore.

SAN Free Capacity Quota

Free SAN capacity quota of a vStore.

NAS Capacity Quota

NAS capacity quota of a vStore.

NAS Free Capacity Quota

Free NAS capacity quota of a vStore.

SAN Total Capacity

SAN total capacity of a vStore.

NAS Total Capacity

NAS total capacity of a vStore.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378304

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next