No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change identity_mapping rule

change identity_mapping rule

Function

The change identity_mapping rule command is used to change user mapping rules.

Format

change identity_mapping rule id=? { from_identity=? | to_identity=? | mapping_type=? | priority=? } [ host_name=? | address=? ]

Parameters

Parameter

Description

Value

id=? Mapping rule ID.

The value is an integer from 0 to 18446744073709551615.

from_identity=? Pre-mapping identifier.

The * wildcard character is supported, but the ** is not. The value is a string containing 1 to 256 characters. The value cannot contain (/), ([]), (:), (;), (|), (=), (,), (+), (?), (<>), (@), ("), and control characters. The last character cannot be (.).

mapping_type=? Mapping type.

The value can be "Windows_to_Unix" and "Unix_to_Windows", where:

  • "Windows_to_Unix": maps a Windows user as a UNIX user.
  • "Unix_to_Windows": maps a UNIX user as a Windows user.
to_identity=? Post-mapping identifier.

The value is a string containing 1 to 256 characters. The value cannot contain (/), ([]), (:), (;), (|), (=), (,), (+), (*), (?), (<>), (@), ("), and control characters. The last character cannot be (.).

priority=? Priority of mapping rules.

The value ranges from 1 to 32.

host_name=? Host name.

The value ranges from 1 to 256 characters.

  • The value can consist of letters, digits, hyphens (-), periods (.), and underscores (_).
  • The value starts with a letter or digit and cannot end with a hyphen (-) or underscore (_).
  • The value cannot contain consecutive periods (.), combination of a period and hyphen (.- or -.), or the combination of a period and underscore (._ or _.).
  • The value cannot consist of pure digits.
  • The fully qualified domain name (FQDN) is recommended.
address=? IP address segment.

The value can be an IPv4 address segment or an IPv6 address segment, for example: 192.168.0.0/16.

Level

Administrator

Usage Guidelines

None

Example

Change user mapping rules.

admin:/>change identity_mapping rule id=1 from_identity=windowsusermodify

Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381842

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next