No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk bad_sector_record

show disk bad_sector_record


show disk bad_sector_record is used to query the bad sector records of hard disks.


show disk bad_sector_record





Usage Guidelines

  • If a hard disk does not have a bad sector, only the information indicating that the command is executed successfully is displayed.


To query the bad sector records of hard disks, run the following command. The following command output indicates that there is no bad sector. The command output varies depending on a specific product.

admin:/>show disk bad_sector_record
Disk ID Bad Sector Count
--------- ----------------
DAE000.0 0
DAE000.1 0
DAE000.2 0
DAE000.3 0
DAE000.4 0
DAE000.5 0
DAE000.6 0
DAE000.7 0
DAE000.8 0
DAE000.9 0
DAE000.10 0
DAE000.11 0
DAE000.12 0
DAE000.13 0
DAE000.14 0

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379989

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next