No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_consistency_group

delete hyper_metro_consistency_group


The delete hyper_metro_consistency_group command is used to delete a HyperMetro consistency group.


delete hyper_metro_consistency_group consistency_group_id=? [ is_local_delete=? ]






ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without parameters to obtain the value.


Whether the consistency group will be deleted from local devices.

The value can be:

  • "yes": The consistency group will be deleted from local devices.
  • "no": The consistency group will not be deleted from local devices.

The default value is "no".



Usage Guidelines



To delete the HyperMetro consistency group whose ID is 1, run the following command.

admin:/>delete hyper_metro_consistency_group consistency_group_id=1 
WARNING: You are about to delete the HyperMetro consistency group. Once it is deleted, you cannot restore its configuration. You must reconstruct a new one.  
If the consistency group is deleted locally, perform the operation on both storage arrays. Otherwise, residual configuration of the consistency group exists.  
Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 331694

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next